Call 08048113758 85% Response Rate

our range

Cement Grout

Leading Manufacturer of construction cement grout, g-grout mf-8 cement grout and g-grout uf-9 cement grout from Ahmedabad.
  • Construction Cement Grout
  • Construction Cement Grout
  • Construction Cement Grout
  • Construction Cement Grout
  • Construction Cement Grout
Construction Cement Grout

Construction Cement Grout

Rs 32  / KgGet Best Price

Minimum Order Quantity: 1000 Kg

BrandG-Grout MF-8 & G-Grout UF-9
Usage/ApplicationConstruction
Packaging Size25 kg
Packaging TypePP Bags
ColorGray
Country of OriginMade in India

G-GROUT MF-8

INCEPTION· G- GROUT MF-8 is highly fluid, single component, cementitious grout pre packed .

G-GROUT MF-8 powder  It is manufactured by unique PSD technology to facilitate easy to inject and effective deep fine cracks, pores and voids. It has much finer particle size than other hydraulically setting materials. It is produced in state of art manufacturing plants in a controlled environment resulting in excellent filling quality.

PURPOSE·   G- GROUT MF-8 is suitable for injecting and grouting in rock, soil, concrete and masonry and for filling joints, cracks and holes. ·MF-8 can be used at vertical and horizontal surfaces working. MF-8 is a ready-to-use dry-blend mortar based on cement modified with organic additives, which hardens without shrinkage when mixed with water



Additional Information:

  • Production Capacity: 500 MT
  • Delivery Time: PROMPT
  • Packaging Details: Jumbo Bags Packing Also Available

View Complete details

get quoterequest a call back
  • G-Grout MF-8 Cement Grout
  • G-Grout MF-8 Cement Grout
  • G-Grout MF-8 Cement Grout
  • G-Grout MF-8 Cement Grout
  • G-Grout MF-8 Cement Grout
G-Grout MF-8 Cement Grout

G-Grout MF-8 Cement Grout

Rs 32  / KgGet Best Price

Minimum Order Quantity: 1000 Kg

BrandG-GROUT MF-8
Usage/ApplicationConstruction
Packaging Size25 kg
Packaging TypePP Bags
ColorGray
FormPowder
Country of OriginMade in India

G-GROUT MF-8

INCEPTION· G- GROUT MF-8 is highly fluid, single component, cementitious grout pre packed .

G-GROUT MF-8 powder  It is manufactured by unique PSD technology to facilitate easy to inject and effective deep fine cracks, pores and voids. It has much finer particle size than other hydraulically setting materials. It is produced in state of art manufacturing plants in a controlled environment resulting in excellent filling quality.

PURPOSE·   G- GROUT MF-8 is suitable for injecting and grouting in rock, soil, concrete and masonry and for filling joints, cracks and holes. ·MF-8 can be used at vertical and horizontal surfaces working. MF-8 is a ready-to-use dry-blend mortar based on cement modified with organic additives, which hardens without shrinkage when mixed with water

BENEFITS ·      G-GROUT MF-8 can be injected with standard cement grouting equipment

·      Compatible with most of the admixtures to accelerate / retard the setting time

·      Supports all portions of structures

·      Fill up the voids in concrete structure, control or prevent the structure from leakage or weak structures to strengthen

·      Non-toxic, Non-Hazards

·      Eco friendly & Cost Effective.

TECHNICAL SPECIFICATION

Properties                   G-Grout Value

Consistency                Dry Powder

Colour                          Grey

METHODS OF USES·    Pre-process:

The substrate must be cleaned down to load bearing grain structure. Before grouting the substrate is to be rinsed until it is saturated excess water will be removed.
Mixing:

MF-8 should be mixed with a slowly rotating mixer to avoid air pockets. First add 2/3 of the totally required water. After mixing for a short time add the balance of water. It should be mixed for approx. 6 minutes. Plastic consistency for vertical and overhead surfaces: 4 litres of water per 20 kg bag Liquid consistency for injection as per requirement.

PACKAGING G-GROUT MF-8 is available in Bulk Jumbo bags with plastic inner liner. The product is also available in 25 kg plastic line bags.

STORAGE G-GROUT MF-8 when stored correctly has an indefinite shelf life. Like cement, it must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo. Shelf life is at least 12 month in original packaging when stored in dry conditions between 15-25°C, protected from heat, frost and direct sunlight. SAFETY INFORMATION Extensive testing has shown G-GROUT MF-8 to be non-toxic and environmentally benign. No known significant health risks are associated with G-GROUT MF-8 but high con-centrations of dust may cause irritation. It is recommended that suitable protective clothing, gloves and eye/face protection is worn. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice



Additional Information:

  • Production Capacity: 500 MT
  • Delivery Time: Immediately
  • Packaging Details: Customize Packing also available

View Complete details

get quoterequest a call back
  • G-Grout UF-9 Cement Grout
  • G-Grout UF-9 Cement Grout
  • G-Grout UF-9 Cement Grout
  • G-Grout UF-9 Cement Grout
G-Grout UF-9 Cement Grout

G-Grout UF-9 Cement Grout

Rs 32  / KgGet Best Price

Minimum Order Quantity: 1000 Kg

BrandG-GROUT UF-9
Usage/ApplicationConstruction
Packaging Size25 kg
TypePOWDER
ColorGray
Packaging TypePP BAGS
GradeIndustrial
Country of OriginMade in India
Introduction

 

G-GROUT UF-9 is high strength, single component grout powder. It has particle size much finer than other hydraulically setting material. It is produced in well known manufacturing plant in a controlled environment resulting in consistent quality. It is manufactured by unique particle size distribution technique to enable finest particle size for application.

Application

·         Ground stabilization / consolidation by soil injection, permeation grouting, curtain grouting for dam structures, etc.

·         Pre and post excavation injection process for tunneling, caverns, mines to secure the strata by filling rock fissures, voids, cavities

·         Injection grouting of joints in masonry structures, restoration of heritage structures, dams, etc.

 

Advantages

·         G-GROUT UF-9 can be injected with standard cement grouting equipment

·         Compatible with most of the admixtures to accelerate / retard the setting time

·         Effective penetration and filling of deep fine cracks, fissures & pore spaces. Imparts greater water tightness

·         Compatible with structural concrete

·         Non-toxic, Non-Hazards,

·         Environmentally friendly

·         It can be use as water proofing

·         Cost effective

 

 

 

Properties

 

 

Properties

G-Grout UF-9 Value

Fineness

>7000 cm2/gm

Particle Size

< 20 microns

Form

Dry Powder

Component

Single

Marsh Cone Viscosity1

25 to 35 Sec

Compressive Strength

>35 MPa at 7 Days
>50 MPa at 28 Days

 

STORAGE

 

G-GROUT UF-9 when stored correctly has an indefinite shelf life. Like cement, it must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo.

 

 

Additional Information:

  • Production Capacity: 500 MT
  • Delivery Time: immediately
  • Packaging Details: Customize Packing also available

View Complete details

get quoterequest a call back

EXPLORE MORE CATEGORIES